MATERIAL TRANSFER HOSE

Material Handling Hose

Material handling hose is designed for conveying powders, granules and bulk solids — cement, grain, ore sand, chemical powders and similar. Unlike a hydraulic hose, what passes through it is not liquid but solid material in a sliding-friction state, so the selection logic is entirely different: abrasion resistance and static dissipation usually matter more than pressure capacity.

Construction

• Inner Tube: Natural + butadiene synthetic rubber.
• Reinforcement: High-strength polyester cord + spiral steel wire + conductive copper wire.
• Outer Cover: Natural + styrene-butadiene synthetic rubber.

Working Temperature: -20°C to 80°C.

Why the Conductive Copper Wire Matters

The reinforcement combines high-strength polyester cord, spiral steel wire and a conductive copper wire. Polyester gives strength and elasticity, the steel wire guarantees pressure capacity, and the copper wire is the key: it forms an electrostatic-dissipation path that carries away the static built up by sliding friction, preventing accumulation that could spark. This is the most fundamental difference from an ordinary transfer hose, and a direct safety requirement when moving combustible powders or granules.

How to Select

• Confirm anti-static needs first. When conveying combustible powders or granules, static accumulation is a far greater safety threat than wear. Choose a conductive copper-wire structure and confirm it meets site requirements.
• Evaluate media abrasiveness. Hard, angular grains like cement and ore sand consume the inner layer fastest. Look at inner abrasion performance and overall wall thickness margin.
• Consider material retention risk. Fine powders and easily-caking media tend to lodge inside the hose; poor lining conformability causes buildup, caking or blockage. Lining smoothness and conformability directly affect how hard clearing is — often overlooked.

Frequently Asked Questions

What does the conductive copper wire do?
It forms an electrostatic-dissipation path. As material slides and rubs inside the hose it builds static; the copper wire carries it away before it reaches dangerous levels. Where flammable media are moved, this function is tied directly to production safety.

Can it convey high-temperature material?
Check whether the actual media temperature falls inside the rated range. If clearly higher, choose a high-temperature dedicated structure instead of pushing the hose's upper limit.

Is fast wear a material problem or a usage problem?
Both. Highly abrasive media is the main cause, but so is method: material lodged inside, or forced dragging during clearing, and long-term friction with the pipe wall all accelerate wear. Proper layout and less forced dragging delay it.

How is it different from a conveyor belt?
A hose is a pressure-bearing conveying member that must stay structurally stable under load and conveying pressure; a belt is mainly for carrying and continuous transport. Focus selection on media compatibility, abrasiveness and connection method.

Why Yibo

Yibo Technology focuses on hydraulic, high-pressure and industrial hose manufacturing with complete in-house production from raw material to finished product. For material handling, where abrasion and static dissipation are clear requirements, we give advice based on material properties, conveying method and safety needs rather than simply quoting the highest specification. We understand the condition first, then discuss product — tell us the media, frequency and layout, and we match the right structure. Small trial orders and volume customization are both supported.

Get a dedicated quote for your material handling hose — leave your contact details and our technical advisor will return a detailed plan and price within one hour (7×24 online).