EN 8571SC vs 2SC Hydraulic Hose: What to Choose
EN 857 1SC vs 2SC compact hose compared: same pressure in a smaller envelope — when compact hose is the right choice.
View full specification →Product Series
Buying Guides
12Models in this series
12 Models in One Page — Parameters & Features
EN 857
EN 8531SN vs 2SN Hydraulic Hose: What to Choose
EN 853 1SN vs 2SN compared side by side with the real specification tables: pressure by size, bend radius and where each one is used.
View full specification →
EN 8532SN vs 4SP Hydraulic Hose: Which to Choose
EN 853 2SN braid vs EN 856 4SP spiral compared with real specification tables: the pressure range where you must move to spiral hose.
View full specification →
EN 8564SP vs 4SH Hydraulic Hose: What to Choose
EN 856 4SP vs 4SH spiral hose compared: pressure class, impulse performance and where each specification is normally used.
View full specification →Braided vs Spiral Hydraulic Hose: How to Choose
Braided vs spiral hydraulic hose explained: construction, pressure range, impulse life and how to pick per circuit.
View full specification →EN 853 / EN 856EN vs SAE Hydraulic Hose Standards: Key Differences
EN 853 / EN 856 / EN 857 vs SAE 100R standards explained, with the actual specification tables for the common grades.
View full specification →EN 853Hydraulic Hose Size Chart: Dash to mm Conversion
Hydraulic hose dash size chart: dash number to inch, DN and actual inside/outside diameter, based on the real EN 853 2SN specification table.
View full specification →Why Hydraulic Hoses Fail: Causes and Prevention
The most common hydraulic hose failure causes: wrong specification, bend radius, abrasion, heat, contamination and poor crimping — plus how to prevent each.
View full specification →
SAE 100R12100R12 vs 4SP Hydraulic Hose: Which to Choose
SAE 100R12 and EN 856 4SP hydraulic hose compared with real specification tables — pressure, bend radius and where each standard is used.
View full specification →
R13 vs R15 Hydraulic Hose: Which to Choose
Multi-layer spiral R13 vs R15 compared: the top two pressure classes, with real specification tables and where each is used.
View full specification →
SAE 100R16R16 Compact vs 2SN Hydraulic Hose: Which to Choose
SAE 100R16 compact-braid hydraulic hose vs EN 853 2SN standard braid: real specification tables, pressure and size range side by side.
View full specification →
SAE 100R17R17 vs R19 Hydraulic Hose: Which to Choose
SAE 100R17 vs R19 constant-pressure hose compared: what constant pressure means and why it simplifies stocking.
View full specification →Need help selecting a model or requesting a quote?
Send us the media, bore, working pressure, length and fitting type and we will confirm the model. All ratings are subject to the technical data table on each product page.
| Model | Bore range | Sizes | Working pressure | Burst pressure | Standard | Temperature | Page |
|---|---|---|---|---|---|---|---|
| 1SC vs 2SC Hydraulic Hose: What to Choose | — | — | — | — | EN 857 | — | Open → |
| 1SN vs 2SN Hydraulic Hose: What to Choose | — | — | — | — | EN 853 | — | Open → |
| 2SN vs 4SP Hydraulic Hose: Which to Choose | — | — | — | — | EN 853 | — | Open → |
| 4SP vs 4SH Hydraulic Hose: What to Choose | — | — | — | — | EN 856 | — | Open → |
| Braided vs Spiral Hydraulic Hose: How to Choose | — | — | — | — | — | — | Open → |
| EN vs SAE Hydraulic Hose Standards: Key Differences | — | — | — | — | EN 853 / EN 856 | — | Open → |
| Hydraulic Hose Size Chart: Dash to mm Conversion | — | — | — | — | EN 853 | — | Open → |
| Why Hydraulic Hoses Fail: Causes and Prevention | — | — | — | — | — | — | Open → |
| 100R12 vs 4SP Hydraulic Hose: Which to Choose | — | — | — | — | SAE 100R12 | — | Open → |
| R13 vs R15 Hydraulic Hose: Which to Choose | — | — | — | — | — | — | Open → |
| R16 Compact vs 2SN Hydraulic Hose: Which to Choose | — | — | — | — | SAE 100R16 | — | Open → |
| R17 vs R19 Hydraulic Hose: Which to Choose | — | — | — | — | SAE 100R17 | — | Open → |
Inside the YIBO Hose Factory
Certifications & Approvals
What to Send Us for an Accurate Quotation
MediaName, concentration and compatibility
PressureContinuous rating, peaks and impulse
TemperatureContinuous, peak and ambient
DimensionsBore, length, minimum bend radius
FittingsStandard, material and assembly
DocumentsTarget market, certificates and tests
Frequently Asked Questions
How many models are in this series?
12 product models, each with its own full specification page.
Which figures are authoritative?
The technical data table on each product page.
How do I request a quote?
Send the parameters above to [email protected], use the enquiry form, or call +86 137 2136 0724.
All products in this series
1SC vs 2SC Hydraulic Hose: What to Choose
EN 857 1SC vs 2SC compact hose compared: same pressure in a smaller envelope — when compact hose is the right choice.
View specification →
1SN vs 2SN Hydraulic Hose: What to Choose
EN 853 1SN vs 2SN compared side by side with the real specification tables: pressure by size, bend radius and where each one is used.
View specification →
2SN vs 4SP Hydraulic Hose: Which to Choose
EN 853 2SN braid vs EN 856 4SP spiral compared with real specification tables: the pressure range where you must move to spiral hose.
View specification →
4SP vs 4SH Hydraulic Hose: What to Choose
EN 856 4SP vs 4SH spiral hose compared: pressure class, impulse performance and where each specification is normally used.
View specification →
Braided vs Spiral Hydraulic Hose: How to Choose
Braided vs spiral hydraulic hose explained: construction, pressure range, impulse life and how to pick per circuit.
View specification →
EN vs SAE Hydraulic Hose Standards: Key Differences
EN 853 / EN 856 / EN 857 vs SAE 100R standards explained, with the actual specification tables for the common grades.
View specification →
Hydraulic Hose Size Chart: Dash to mm Conversion
Hydraulic hose dash size chart: dash number to inch, DN and actual inside/outside diameter, based on the real EN 853 2SN specification table.
View specification →
Why Hydraulic Hoses Fail: Causes and Prevention
The most common hydraulic hose failure causes: wrong specification, bend radius, abrasion, heat, contamination and poor crimping — plus how to prevent each.
View specification →
100R12 vs 4SP Hydraulic Hose: Which to Choose
SAE 100R12 and EN 856 4SP hydraulic hose compared with real specification tables — pressure, bend radius and where each standard is used.
View specification →
R13 vs R15 Hydraulic Hose: Which to Choose
Multi-layer spiral R13 vs R15 compared: the top two pressure classes, with real specification tables and where each is used.
View specification →
R16 Compact vs 2SN Hydraulic Hose: Which to Choose
SAE 100R16 compact-braid hydraulic hose vs EN 853 2SN standard braid: real specification tables, pressure and size range side by side.
View specification →
R17 vs R19 Hydraulic Hose: Which to Choose
SAE 100R17 vs R19 constant-pressure hose compared: what constant pressure means and why it simplifies stocking.
View specification →
Browse by series
All seriesWire Braid Hydraulic Hose (12)Wire Wound Hydraulic Hose (5)Fiber Reinforced & Resin Hose (9)Industrial Hose (26)Oil, Fuel & Refuelling (7)Steam, Heat & Cold (2)Vehicle & Transport (4)UHP Water Cleaning (2)Assemblies & Pilot Lines (3)Buying Guides (12)By Application (20)Hydraulic Hose Sizes (8)
