Home|Product Center|Industrial & Food Hose|HYDRAULIC OIL DELIVERY HOSE

HYDRAULIC OIL DELIVERY HOSE

OIL & FUEL · 20 bar working / 60 bar burst · 6–102 mm

Hose Construction
Structure:Inner Tube: NBR + SBR (Nitrile Butadiene Rubber + Styrene Butadiene Rubber) /
Reinforcement:High-strength polyester cord /
Cover:NR + SBR (Natural Rubber + Styrene Butadiene Rubber)
Hose Features
Bend Radius:Down to 60–800 mm minimum bend radius.
Size Coverage:14 codes in the table, 6–102 mm bore, from 6 upward.
Mass Per Metre:0.18–4.21 kg/m across the published codes; every figure is per code, not an average.
Application:Features strong oil mist resistance and is also applied in hydraulic return lines.
Outer Diameter:14–119 mm outside diameter over the range.

Online consultation Leave a message

24 Hours Service Hotline

+86 137 2136 0724

CONDUCTIVE CHEMICAL SUCTION AND DISCHARGE HOSE

Data Display

INNER DIAMETER I.D. (mm)	INNER DIAMETER I.D. (inch)	OUTER DIAMETER O.D. (mm)	WORKING PRESSURE W.P (psi)	WORKING PRESSURE W.P (bar)	psi	WORKING PRESSURE B.P. (psi)	WORKING PRESSURE B.P. (bar)	psi	BENDING RADIUS B.R. (mm)	WEIGHT (kg/m)	LENGTH (ft)	LENGTH (m)
6	1/4"	14	300	20	290	900	60	870	60	0.18	328	100
8	5/16"	16	300	20	290	900	60	870	80	0.21	328	100
10	3/8"	18	300	20	290	900	60	870	100	0.25	328	100
13	1/2"	22	300	20	290	900	60	870	130	0.36	328	100
16	5/8"	26	300	20	290	900	60	870	160	0.48	328	100
19	3/4"	29	300	20	290	900	60	870	190	0.55	328	100
25	1"	36	300	20	290	900	60	870	250	0.78	328	100
32	1-1/4"	44	300	20	290	900	60	870	250	1.06	200	61
38	1-1/2"	52	300	20	290	900	60	870	300	1.41	200	61
51	2"	65	300	20	290	900	60	870	400	1.82	200	61
64	2-1/2"	78	300	20	290	900	60	870	500	2.30	200	61
76	3"	90	300	20	290	900	60	870	600	2.68	200	61
102	4"	119	300	20	290	900	60	870	800	4.21	200	61
Note: Other technical data can be customized on request.

Values are reproduced from the official YIBO product page. psi columns = MPa × 145.038, rounded. Across the 14 codes the top rating is 20 bar working / 60 bar minimum burst; the order data sheet governs the batch.

⬇ Download Datasheet (PDF)

Application & Selection

Features strong oil mist resistance and is also applied in hydraulic return lines. HYDRAULIC OIL DELIVERY HOSE covers 6–102 mm across 14 published codes.

HYDRAULIC OIL DELIVERY HOSE carries a published 20 bar working, 60 bar minimum burst rating. Plan the supports around 0.18–4.21 kg/m per metre. HYDRAULIC OIL DELIVERY HOSE assemblies ship crimped and pressure-tested, with metric / BSP / JIC / ORFS ends. HYDRAULIC OIL DELIVERY HOSE runs roughly 20 days from confirmation over its 14 codes, with OEM marking and packing.

Inside the YIBO Hose Factory · Where this line runs: 14 codes, 6–102 mm bore, braided or spiral-wound and burst-tested on one floor.

Frequently Asked Questions

What bore sizes does HYDRAULIC OIL DELIVERY HOSE cover?

HYDRAULIC OIL DELIVERY HOSE is published in 14 codes spanning 6–102 mm nominal bore, from 6 upward. 14 rows over the 6–102 mm bore band, each with its own pressure and mass.

What is the working pressure of HYDRAULIC OIL DELIVERY HOSE?

HYDRAULIC OIL DELIVERY HOSE carries a published 20 bar working, 60 bar minimum burst rating. Sizing: read the 14 rows over 6–102 mm against your own circuit rather than the range maximum.

What is the minimum order quantity for HYDRAULIC OIL DELIVERY HOSE?

MOQ on HYDRAULIC OIL DELIVERY HOSE is 100 m, covering the whole 6–102 mm band. Samples of HYDRAULIC OIL DELIVERY HOSE come off the same 14-code run you would order from.

What is the production lead time on HYDRAULIC OIL DELIVERY HOSE, and can it carry our brand?

HYDRAULIC OIL DELIVERY HOSE production runs about 20 days from confirmation, across the 6–102 mm band. HYDRAULIC OIL DELIVERY HOSE assemblies ship crimped and pressure-tested, with metric / BSP / JIC / ORFS ends.