Home|Product Center|Industrial & Food Hose|AIR / WATER DELIVERY HOSE

AIR / WATER DELIVERY HOSE

FACTORY DIRECT · ISO 9001 · OEM AVAILABLE · 20 bar working / 60 bar burst · 6–102 mm

Hose Construction
Structure:Inner Tube: NR + SBR (Natural Rubber + Styrene Butadiene Rubber) /
Reinforcement:High-strength polyester cord + spiral steel wire /
Cover:NR + SBR (Natural Rubber + Styrene Butadiene Rubber)
Hose Features
Bend Radius:Minimum bend radius runs 60–800 mm over the range.
Pressure Rating:20 bar working against 60 bar minimum burst — a 3.0× margin.
Size Coverage:Covered by 14 codes from 6 mm to 102 mm bore, from 6 upward.
Mass Per Metre:From 0.18 to 4.14 kg/m depending on bore .
Application:General-purpose air hose suitable for medium to heavy-duty engineering applications.

Online consultation Leave a message

24 Hours Service Hotline

+86 137 2136 0724

CONDUCTIVE CHEMICAL SUCTION AND DISCHARGE HOSE

Data Display

INNER DIAMETER I.D. (mm)	INNER DIAMETER I.D. (inch)	OUTER DIAMETER O.D. (mm)	WORKING PRESSURE W.P (psi)	WORKING PRESSURE W.P (bar)	psi	BURST PRESSURE B.P. (psi)	BURST PRESSURE B.P. (bar)	psi	BENDING RADIUS B.R. (mm)	WEIGHT (kg/m)	LENGTH (ft)	LENGTH (m)
6	1/4"	14	300	20	290	900	60	870	60	0.18	328	100
8	5/16"	16	300	20	290	900	60	870	80	0.21	328	100
10	3/8"	18	300	20	290	900	60	870	100	0.25	328	100
13	1/2"	22	300	20	290	900	60	870	130	0.36	328	100
16	5/8"	26	300	20	290	900	60	870	160	0.48	328	100
19	3/4"	29	300	20	290	900	60	870	190	0.55	328	100
25	1"	36	300	20	290	900	60	870	250	0.78	328	100
32	1-1/4"	44	300	20	290	900	60	870	250	1.04	200	61
38	1-1/2"	52	300	20	290	900	60	870	300	1.38	200	61
51	2"	65	300	20	290	900	60	870	400	1.78	200	61
64	2-1/2"	78	300	20	290	900	60	870	500	2.25	200	61
76	3"	90	300	20	290	900	60	870	600	2.62	200	61
102	4"	119	300	20	290	900	60	870	800	4.14	200	61
Note: Other technical data can be customized on request.

Values are reproduced from the official YIBO product page. psi columns = MPa × 145.038, rounded. 14 codes from 6 mm to 102 mm bore — the top rating is not the whole story; the order data sheet governs the batch.

⬇ Download Datasheet (PDF)

Application & Selection

General-purpose air hose suitable for medium to heavy-duty engineering applications. AIR / WATER DELIVERY HOSE covers 6–102 mm across 14 published codes.

AIR / WATER DELIVERY HOSE is rated 20 bar working and 60 bar minimum burst at the top of the 6–102 mm bore range, a 3:1 margin. Mass is published at 0.18–4.14 kg/m per metre. Crimped and tested to the 20 bar working figure, across the 14 codes of this range. Allow about 20 days for AIR / WATER DELIVERY HOSE across the 6–102 mm band, OEM branding included.

Inside the YIBO Hose Factory · One floor for the 6–102 mm range: winding, crimping, burst testing.

Frequently Asked Questions

What bore sizes does AIR / WATER DELIVERY HOSE cover?

AIR / WATER DELIVERY HOSE is published in 14 codes spanning 6–102 mm nominal bore, from 6 upward. 14 codes across 6–102 mm, row by row.

What is the working pressure of AIR / WATER DELIVERY HOSE?

AIR / WATER DELIVERY HOSE is rated 20 bar working and 60 bar minimum burst at the top of the 6–102 mm bore range, a 3:1 margin. Sizing: 14 codes, from 0.18 kg/m upward — the mass you plan with is the row you order.

What is the MOQ on AIR / WATER DELIVERY HOSE?

AIR / WATER DELIVERY HOSE starts at 100 m across the 6–102 mm band; free samples come off the same run.

How long does AIR / WATER DELIVERY HOSE take to produce, and do you do OEM?

Lead time on AIR / WATER DELIVERY HOSE is around 20 days from confirmation, covering the 6–102 mm band. Crimped and tested to the 20 bar working figure, across the 14 codes of this range.