Home|Product Center|Industrial & Food Hose|ANIMAL FEED/GRAIN HOSE

ANIMAL FEED/GRAIN HOSE

HIGH WEAR RESISTANT · ANTI-STATIC · SUCTION / VACUUM RATED

Hose Construction
Structure:Inner rubber layer: wear-resistant natural rubber (brown). reinforcement layer: high-strength tire cord plus spiral steel wire, with two additional conductive stainless steel ropes. outer rubber layer: special synthetic rubber, with wear resistance, ozone resistance and weather resistance
Working Temperature:-40℃-80℃
Hose Features
Bend Radius:Minimum bend radius runs 350 mm over the range.
Pressure Rating:4 bar working pressure and 12 bar minimum burst — a 3.0× margin taken straight from the published column.
Mass Per Metre:From 3.88 to 3.88 kg/m depending on bore .
Application: suitable for feed mills, farm feeding lines, grain silos and grain suction equipment.
Outer Diameter:118 mm outside diameter over the range.

Online consultation Leave a message

24 Hours Service Hotline

+86 137 2136 0724

CONDUCTIVE CHEMICAL SUCTION AND DISCHARGE HOSE

Data Display

I.D mm	O.D mm	W.P bar	psi	B.P bar	psi	MIN. BENDING RADIUS mm	WEIGHT kg/m	SOFT HEAD LENGTH cm
102	118	4	58	12	174	350	3.88	10

Values are reproduced from the official YIBO product page. psi columns = MPa × 145.038, rounded. Across the 1 codes the top rating is 4 bar working / 12 bar minimum burst; the order data sheet governs the batch.

⬇ Download Datasheet (PDF)

Application & Selection

Application: suitable for feed mills, farm feeding lines, grain silos and grain suction equipment. for negative pressure suction and positive pressure conveying of corn, wheat, rice, pellet feed, powdered feed and other grains and livestock feed. used for silo transfer, loading and unloading, automatic feeding in farms. ANIMAL FEED/GRAIN HOSE covers 102–102 mm across 1 published codes.

ANIMAL FEED/GRAIN HOSE tops out at 4 bar working and 12 bar minimum burst over its 1 codes. Plan the supports around 3.88–3.88 kg/m per metre. ANIMAL FEED/GRAIN HOSE assemblies ship crimped and pressure-tested, with metric / BSP / JIC / ORFS ends. Allow about 20 days from confirmation for ANIMAL FEED/GRAIN HOSE; OEM marking and packing on request.

Inside the YIBO Hose Factory · 1 codes built and tested here, on one shop floor.

Frequently Asked Questions

What is the working pressure of ANIMAL FEED/GRAIN HOSE?

ANIMAL FEED/GRAIN HOSE tops out at 4 bar working and 12 bar minimum burst over its 1 codes. Sizing: check the duty against the -40℃-80℃ window before picking a code.

What is the minimum order quantity for ANIMAL FEED/GRAIN HOSE?

Standard items of ANIMAL FEED/GRAIN HOSE start from 100 m, covering the published codes; free samples are available so the quality can be checked against your medium before you commit to volume.

What is the production lead time on ANIMAL FEED/GRAIN HOSE, and can it carry our brand?

Lead time for ANIMAL FEED/GRAIN HOSE is around 20 days from order confirmation depending on quantity, and it covers the published codes. ANIMAL FEED/GRAIN HOSE assemblies ship crimped and pressure-tested, with metric / BSP / JIC / ORFS ends.

What standard is ANIMAL FEED/GRAIN HOSE built to?

ANIMAL FEED/GRAIN HOSE is produced against HIGH WEAR RESISTANT · ANTI-STATIC · SUCTION / VACUUM RATED under an ISO 9001 quality system with in-house laboratory testing; the applicable standard is stated with the data on this page.